Low Noise Broadband Amplifier, 100 ... 180 MHz

KU LNA BB 1018 A
Active

This high linear preamplifier was developed for applications in VHF communication band

Additional information

Product Data sheet

Download data sheet

Additional product downloads

No additional product downloads available.


Specifications

Frequency range 100..180 MHz
Noise figure @ 18 degrees C typ. 1.0 dB, max. 1.3 dB NF
Gain min. 20 dB
Gain flatness max. +/- 2 dB
Maximum input power 100 mW
Output power (P1dB) typ. 630 mW (+28 dBm)
Output power (Psat) min. 1000 mW (+30 dBm)
Output IP3 typ. 44 dBm
Input return loss (S11) min. 10 dB
Output return loss (S22) typ. 15 dB
Supply voltage +12 ... 15 V DC
Current consumption typ. 400 mA
Operating case temp. range -20 ... +55 degrees C
Input connector / impedance SMA-female, 50 ohms

    Product Applications

    Industrial Processes
  • Moisture content measurement
  • Quantum computing
  • Agricultural processes
  • Infrastructure Management
  • Telemetry
  • Traffic monitoring
  • Remote control
  • Sensors
  • Emergency response systems
  • Navigation
  • GNSS
  • Position, Navigation and Timing
  • Maritime navigation
  • Avionics
  • Test and Measurement
  • EMC testing
  • RF equipment testing
  • RF System Comissioning Support
  • Spectrum surveillance
  • RF Test Suites
  • Avionics
  • Airborne communication
  • Navigation
  • Threat detection
  • Weather detection
  • Spectrum Management
  • Spectrum Monitoring
  • Source geolocation
  • Radio Direction Finding
  • Signals Intelligence
  • Radio Monitoring
  • COMINT
  • Radio Direction Finding
  • C-ESM
  • Radar and Remote Sensing
    Communications
  • SATCOM
  • Secure Communications
  • V/UHF Tactical Communications
  • Point-to-point Communications
  • Repeaters, extenders and boosters
  • Point-to-multipoint Communications
  • Low probability of interception
  • Broadcast
  • Digital
  • Wireless backhaul
  • Academia and Research

    Design Features

  • Low noise figure, Large bandwidth, High IP3 and high output power, Very good input return loss (S11), Static protection (ESD) at preamplifier input, Overvoltage protection and reverse polarity protection, Remote power supply via output connector, Solder pin for direct power supply, Milled aluminium case
search