Down Converter, 5500 ... 6000 MHz
KU LNC 5560 C PRO
Active
With a RF operating frequency range from 5500 to 6000 MHz and a standard IF range from 300 to 900 MHz the the KU LNC 5560 C PRO can be used highly flexible. Due to four configurable oscillator frequencies the down converter can be used with different receivers. An additional user defineable oscillator frequency allows for specific requirements on the IF range. For more flexibility the gain of the down converter can be set in two steps. The KU LNC 5560 C PRO comes in a rugged milled aluminium and is water resistant and ready for outdoor use. For tower mount application a suitable mounting clamp is available.
Additional information
Product Data sheet
Download data sheetAdditional product downloads
No additional product downloads available.
Specifications
| Frequency range | 5500..6000 MHz |
| Noise figure @ 18°C | typ. 1.5 dB, max. 2.0 dB |
| Gain @ 25°C | typ. 35 dB |
| Output IP3 | 25 dBm |
| Maximum input power | 1 mW (0dBm) |
| Frequency range (IF) | 300..900 MHz |
| LO accuracy @ 18°C | +/- 2 ppm |
| LO frequency stability | +/- 3 ppm |
| Supply voltage | +9 ... +36 V DC |
| Current consumption | typ. 250 mA @ 12V DC |
| Maximum case temperature | +55°C |
| Weight | 230 g |
| Dimensions (mm) | 82 x 64 x 22 |
- Secure Communications
- Point-to-point Communications
- Repeaters, extenders and boosters
- Point-to-multipoint Communications
- Low probability of interception
- Digital
- Satellite news gathering
- Wireless backhaul
Product Applications
Communications
Broadcast
- Low noise figure
Large bandwidth
Low phase noise oscillator
High frequency stability of the oscillator
High linearity
Antenna port protected against static discharge
Small and light-weight to allow easy pole mounting
Tri-colour LED indicates unit status and gain mode setting
Overvoltage protection and reverse polarity protection
Remote power supply via output connector
switchable gain
switchable local oscillator frequencies
normal or reverse output spectrum selectable
