Selective Low Noise Amplifier, 1070 ... 1110 MHz
KU LNA 1090 - 2 A TM
Active
The highly linear low-noise amplifier KU LNA 1090-2 A TM is a very narrow-band LNA with a very low noise figure of typically 0.5 dB
Additional information
Product Data sheet
Download data sheetAdditional product downloads
No additional product downloads available.
Specifications
| Frequency range | 1070..1110 MHz |
| Noise figure @ 18 degrees C | typ. 0.5 dB, max. 0.6 dB NF |
| Gain | min. 30 dB |
| Maximum input power | 1 mW |
| Supply voltage | +8 ... 15 V DC |
| Current consumption | typ. 130 mA |
| Operating case temp. range | -40 ... +65 degrees C |
| Input connector / impedance | N-female, 50 ohms |
| Output connector / impedance | N-female, 50 ohms |
| Case | water resistant case incl. V2A mounting clamp |
| Dimensions (mm) | 109 x 85 x 60 |
| Weight | 330 g (typ.) |
| Important note | Maximum input power 1 mW |
- Telemetry
- Traffic monitoring
- Remote control
- Sensors
- Emergency response systems
- Spectrum surveillance
- RF Test Suites
- Airborne communication
- Spectrum Monitoring
- Source geolocation
- Radio Direction Finding
- Radio Monitoring
- COMINT
- Radio Direction Finding
- C-ESM
- SATCOM
- Secure Communications
- Point-to-point Communications
- Repeaters, extenders and boosters
- Point-to-multipoint Communications
- Low probability of interception
- Digital
- Wireless backhaul
Product Applications
Infrastructure Management
Test and Measurement
Avionics
Spectrum Management
Signals Intelligence
Communications
Broadcast
- High IP3 for excellent large-signal performance
Very low noise figure; ESD protection at LNA input
Built-in bias tee for remote power supply via coaxial cable
Built-in band-pass filter
