Super Low Noise Amplifier, 4400 ... 5000 MHz
KU LNA 4450 A
Active
Super Low Noise Amplifier, 4400 ... 5000 MHz
Additional information
Product Data sheet
Download data sheetAdditional product downloads
No additional product downloads available.
Specifications
| Frequency range | 4400..5000 MHz |
| Noise figure @ 18 degrees C | typ. 0.8 dB, max. 0.9 dB NF |
| Gain | min. 24 dB |
| Maximum input power | 1 mW |
| Output power (P1dB) | typ. 20 mW (+13 dBm) |
| Output IP3 | typ. +23 dBm (4750 MHz) |
| Input return loss (S11) | min. 6 dB |
| Output return loss (S22) | min. 9 dB |
| Supply voltage | +8 ... 14 V DC |
| Current consumption | typ. 110 mA |
| Input connector / impedance | SMA-female, 50 ohms |
| Output connector / impedance | SMA-female, 50 ohms |
| Case | milled aluminium |
| Dimensions (mm) | 50 x 30 x 17 |
| Weight | 40 g (typ.) |
- Telemetry
- Traffic monitoring
- Remote control
- Sensors
- Emergency response systems
- Spectrum surveillance
- RF Test Suites
- Airborne communication
- Threat detection
- Spectrum Monitoring
- Source geolocation
- Radio Direction Finding
- Radio Monitoring
- COMINT
- ELINT
- Radio Direction Finding
- C-ESM
- R-ESM
- FMCW Radar
- Speed and and obstruction detection
- Motion sensing
- Foreign object detection
- SATCOM
- Secure Communications
- Point-to-point Communications
- Repeaters, extenders and boosters
- Point-to-multipoint Communications
- Low probability of interception
- Digital
- Wireless backhaul
Product Applications
Infrastructure Management
Test and Measurement
Avionics
Spectrum Management
Signals Intelligence
Radar and Remote Sensing
Communications
Broadcast
- Low noise figure, High gain, Reverse polarity protection, Solder pin for direct power supply
