Power Amplifier, 3400 ... 3600 MHz, 13 W
KU PA 340360 - 13 A
Active
This power amplifier provides high linearity. An isolator at the output protects the semiconductor devices from reverse power. Very good harmonic rejection is achieved. Two detector outputs allow permanent monitoring of forward and reverse power. The amplifier contains an automatic level control (ALC). The desired output power can be adjusted continuously; from nearly zero to the maximum output power.
Additional information
Product Data sheet
Download data sheetAdditional product downloads
No additional product downloads available.
Specifications
| Frequency range | 3400..3600 MHz |
| Output power P1dB | typ. 41.1 dBm, min. 40.8 dBm |
| Output power P3dB | min. 42.3 dBm |
| Output power COFDM (1) | typ. 34.7 dBm, min. 34 dBm |
| Gain (small signal) | typ. 55 dB, min. 53 dB |
| Gain flatness (small signal) | +/-0.5 dB (typ.) |
| Harmonic rejection | min. 45 dB @ 41.7 dBm (CW) |
| IM3 (2) | min. 35 dBc @ 37 dBm PEP |
| Efficiency | min. 24 % @ 41.7 dBm (CW) |
| Supply voltage | +12 ... 14 V DC |
| Operating case temp. range | -20 ... +55°C |
| Dimensions (mm) | 158 x 60 x 20 |
- Secure Communications
- Point-to-point Communications
- Repeaters, extenders and boosters
- Point-to-multipoint Communications
- Low probability of interception
- Digital
- Wireless backhaul
Product Applications
Communications
Broadcast
High Power
- GaAs FET technology, High linearity (class A operation)
Good harmonic rejection, Isolator for protection against high VSWR
Reverse polarity protection
Monitor outputs for forward and reverse power detection (DC voltage)
Adjustable ALC (automatic level control)
ON / OFF control with DC voltage (ON at 5 ... 14 V DC)
