Down Converter, 1700 ... 1900 MHz
KU LNC 1719 C PRO
Active
This converter was developed for MMDS applications. The L-band is converted to the V/UHF range 200-500 MHz. By the use of the latest semiconductors, optimized band pass filters and a SAW oscillator, a high dynamic range and low phase noise of only -100 dBc/Hz @ 10 kHz are achieved. Due to low frequency drift of typ. +/- 3 ppm within 0…+40 degrees C the converter may be used for all digital modulation types. Typical applications are DVB-S, DVB-T, COFDM and QPSK.
Additional information
Product Data sheet
Download data sheetAdditional product downloads
No additional product downloads available.
Specifications
| Frequency range (RF) | 1700..1900 MHz |
| Maximum input power | 1 mW (0dBm) |
| Frequency range (IF) | 200..500 MHz |
| Noise figure @ 18 degrees C | typ. 0,5 dB, max. 1,0 dB |
| Gain @ 25 degrees C | typ. 35 dB / 24 dB |
| Output IP3 | 30 dBm |
| LO accuracy @ 18 degrees C | +/- 2 ppm |
| LO frequency stability | +/- 3 ppm |
| Supply voltage | +9 ... +36 V DC |
| Current consumption | typ. 240 mA @ 12V DC |
| Maximum case temperature | +55 degrees C |
| Dimensions (mm) | 82 x 64 x 22 |
| Weight | 230 g |
- Secure Communications
- Point-to-point Communications
- Repeaters, extenders and boosters
- Point-to-multipoint Communications
- Low probability of interception
- Digital
- Satellite news gathering
- Wireless backhaul
Product Applications
Communications
Broadcast
- Low noise figure
Low phase noise oscillator
High frequency stability of the oscillator
High linearity
Antenna port protected against static discharge
Small and light-weight to allow easy pole mounting
Tri-colour LED indicates unit status and gain mode setting
Overvoltage protection and reverse polarity protection
Remote power supply via output connector
switchable gain
switchable local oscillator frequencies
normal or reverse output spectrum selectable
