Down Converter, 2000 ... 2700 MHz
KU LNC 2027 B PRO
Active
This converter was developed for MMDS applications. The S-band is converted to the UHF range 167-867 MHz. By the use of the latest semiconductors; optimized band pass filters and a SAW oscillator; a high dynamic range and low phase noise of only -98 dBc/Hz @ 10 kHz are achieved. Due to low frequency drift of typ. +/- 3 ppm within 0…+40 C the converter may be used for all digital modulation types. Typical applications are DVB-S; DVB-T; WCS; COFDM and QPSK.
Additional information
Product Data sheet
Download data sheetAdditional product downloads
No additional product downloads available.
Specifications
| Frequency range (RF) | 2000..2700 MHz |
| Maximum input power | 1 mW (0dBm) |
| Frequency range (IF) | 167..867 MHz |
| Noise figure @ 18 C | typ. 1.0 dB, max. 1.3 dB |
| Gain @ 25 C | typ. 30 dB |
| Output IP3 | 18 dBm |
| LO accuracy @ 18 degrees C | +/- 2 ppm |
| LO frequency stability | +/- 3 ppm |
| Phase noise @ 1 kHzPhase noise @ 10 kHzPhase noise @ 100 kHz | typ. -93 dBc/Hztyp. -98 dBc/Hztyp. -104 dBc/Hz |
| Supply voltage | +9 ... +36 V DC |
| Current consumption | typ. 300 mA @ 12V DC |
| Maximum case temperature | +55 degrees C |
| Input connector / impedanceOutput connector / impedance | N-female, 50 ohmsN-female, 50 ohms |
| Dimensions (mm) | 82 x 64 x 22 |
| Weight | 230 g |
- Secure Communications
- Point-to-point Communications
- Repeaters, extenders and boosters
- Point-to-multipoint Communications
- Low probability of interception
- Digital
- Satellite news gathering
- Wireless backhaul
Product Applications
Communications
Broadcast
- Low noise figure; Large bandwidth; Low phase noise oscillator; High frequency stability of the oscillator; High linearity; Overvoltage protection and reverse polarity protection; Remote power supply via output connector
